Hydac ContaminationSensor CS1220 VIMS - Intended and Improper Use

ContaminationSensor CS1000 General safety guidelines
HYDAC Filter Systems GmbH
en
Page 9 / 36
CS1000 CAT-VIMS3478916 en 2009-04-15.doc 2009-04-15
Basic symbols
DANGER
DANGER denotes situations
which can lead to death if
safety precautions are not
observed.
WARNING
WARNING denotes situations
which can lead to death if
safety precautions are not
observed.
CAUTION
CAUTION denotes situations
which can lead to severe
injuries if safety precautions
are not observed.
NOTICE
NOTICE denotes situations
which can lead to property
damage if safety precautions
are not observed.
Intended use
The ContaminationSensor (CS) was developed for the continuous monitoring of
particulate contamination in hydraulic systems.
By determining the type, size and quantity of contamination, quality standards can
be verified and documented, and the required optimization measures can be
implemented.
Any other use shall be deemed not in keeping with the product's intended use. The
manufacturer is not liable for any damage resulting from this use.
Intended use of the product also includes:
• Permanent monitoring of solid particle contamination in hydraulic and lubrication
systems
• Maintaining adherence to all the instructions contained herein.
Improper use
Improper use may result in hazard to life and limb.
Examples of improper use:
• Improper connection of the CS voltage and sensor cables.
• Operation with non-approved fluids.