2
CONTENTS
Section 1 Safety Requirements………………………………………………....................
Section 2 Barfeed Installation…………………………………………………………….
3.0 Site Preparation…………………………………………………………………………
3.10 Delivery and Inspection of Barfeed…………………………………………………...
3.20 Positioning of Barfeed………………………………………………………………...
3.30 Alignment Procedure………………………………………………………………….
3.40 Operation of Barfeed………………………………………………………………….
Section 3 Barfeed Mechanism
4.1 The Barfeed Master Spindle Reduction Liner system…………………………………
4.2 Fitting Master Spindle Reduction Liner with BSU…………………………………….
4.3 Fitting Master Liner & Correct Sized Bored Bushings………………………………...
4.4 Height Adjustment of the Support Channel…………………………………………….
4.5 Bar Stops & Adjustments………………………………………………………………
4.6 Changing or Removing the Push Rod…………………………………………………..
Section 4 External Electrical Devices
5.1 Pusher forward movement sensor………………………………………………………
5.2 Location of Cross slide sensors…………………………………………………………
5.3 Location of Bushing sensor…………………………………………………………….
5.4 Location of Guard sensor……………………………………………………………….
5.5 Location of Material sensor…………………………………………………………….
5.6 Location of Cylinders sensors…………………………………………………………..
Section 5 Pneumatic Devices
6.1 Location of Loader cylinder……………………………………………………………
6.2 Location of Cross slide cylinder………………………………………………………..
Section 6 Pneumatic Control Devices
7.1 Location of Cross slide and Cam adjustment valves…………………………………..
7.2 Pusher adjustment valve……………………………………………………………….
7.3 Location of air pressure Regulator……………………………………………………..
7.4 Schematic of pneumatic system………………………………………………………..
Section 7 Electrical Signal
8.1 Input and Output signals and descriptions…………………………………………..…
To Next Page
Loading...
