33
9.1.6 Main Isolator; the Lathe supply’s the Barfeed’s power. This isolator will cut the
power supply to the Barfeed, this switch gear is also for emergency isolation to
the Barfeed.
9.1.7 Viewing window; this allows the operator to observe the plc panel that’s
directly viewed behind the window.
NOTE; when there becomes an inherent fault with the Barfeed and
unable to diagnose there are LED,’s (input and output) illuminated on the
front panel of the PLC which are visual viewed through the window of
the control cabinet, these are to be noted in the Barfeed’s fault condition
before contacting us.
To Next Page
Loading...
