80
Multi-Stacker
The multi-stacker allows multiple bars to be layered relying on gravity to allow the
next bar to follow through.
The use of the multi-stacker must be by trained personnel.
Each multi-stacker is built to suit the customers’ requirements, meaning that the
depth and width may different dependent upon how many parts will fit on the
magazine.
Image shown on page 87 on use, best practice is to allow the distance between the
underside of the ‘stacker guide’ and the magazine base is for 1.5 x the diameter.
The multi-stackers are fully guarded.
To Next Page
Loading...
