Hypertherm HyPrecision 50S - Low-Pressure Water System Parts; High-Pressure Water System Parts; Intensifier High-Pressure Ends Parts

154 HyPrecision 50S/60S/75S Operator Manual 808690
6 – Parts lists
Parts lists
Low-pressure water system
Part number Description
11829 Water filter housing
11835 Water accumulator
11841 Hose, 1/2 inch, 250 psi
12056 Boost pump motor, 1/2 hp
12061 Boost pump relief valve, 1/2-inch NPT
12614 Valve, brass, 1/2-inch NPT, 24 VDC
11767 Switch, filter water pressure
11836 Water-modulating valve
13897 TDS meter
High-pressure water system
Part number Description
12280 Attenuator assembly, 1 liter
11595 Attenuator assembly, 2 liter
12943 High-performance bleed-down valve body
13384 Low-pressure seal kit
12579 Protective sheathing, 1/4 inch
12580 Protective sheathing, 3/8 inch
14688 Sheathing end cover, 1/4-inch high-pressure tubing
14687 Sheathing end cover, 3/8-inch high-pressure tubing
Intensifier high-pressure ends
11523 Check valve assembly
11520 Low-pressure poppet basket
11530 Output adapter
11522 High-pressure cylinder
11609 Seal housing
11521 Spacer tube
11608 Plunger bearing
11210-30 Lapping paper, 30 micron