Hypertherm HyPrecision 50S User Manual

HyPrecision 50S/60S/75S Operator Manual 808690 77
5 – Preventive maintenance
Preventive maintenance
Hydraulic system
Check the hydraulic fluid indicator
Do this task when the pump is running at operating temperature.
Replace the filter after every 1,500 hours of operation or when the white indicator bar stays in the red zone while
the pump is running at operating temperature. Refer to page 83 for instructions.
Service Interval
Check the hydraulic fluid indicator Before every work shift
Replace the hydraulic filter (page 83) After every 1,500 hours of operation
1
2
1 White indicator bar 2 Red zone

Hypertherm HyPrecision 50S Specifications

General

Brand	Hypertherm
Model	HyPrecision 50S
Category	Water Pump
Language	English