HyPrecision 50S/60S/75S Operator Manual 808690 185
Installation
Section 9
Installation
Safety
Hypertherm products are designed and manufactured with a commitment to continuous quality control and
safety. Contact a Hypertherm Technical Service Associate for information and support regarding the installation,
operation, maintenance, and repair of this equipment.
Refer to the instruction manual. Read and understand all of the safety guidelines in this manual.
DANGER
Dangerous voltage
To reduce the risk of serious injuries or death, wear approved protection and follow safety
recommendations when working with electricity.
WARNING
A waterjet is a cutting tool. A high-pressure injection injury is a surgical emergency. Seek immediate
medical treatment for all high-pressure waterjet injuries. Delayed treatment can cause serious
injuries or death.
WARNING
Do not touch a hot surface.
WARNING
Personal protective equipment is recommended. Failure to wear personal protective equipment can
cause injuries or death.
Keep the work area clean and free of fluid spills.
To Next Page
Loading...
Need help?
General
