44 HyPrecision 50S/60S/75S Operator Manual 808690
4 – Operation
Operation
Hypertherm products are designed and manufactured with a commitment to continuous quality control and
safety. Contact a Hypertherm Technical Service Associate for information and support regarding the installation,
operation, maintenance, and repair of this equipment.
High-pressure water can cause eye injuries. Wear approved eye protection when operating or
working near this equipment.
This waterjet equipment might exceed national and local codes for permitted noise levels.
When this pump is running, the noise level is 75 dB(A) to 80 dB(A). Noise level is related to factors
such as water flow rate, pipe layout, and the acoustical characteristics of the building.
Prolonged exposure to noise can cause permanent hearing loss. Wear approved ear protection and
control exposure time when operating or working near this equipment.
High-pressure water can cause severe cuts or lacerations, abrasions, and punctures. Wear
approved hand protection when operating or working near this equipment.
Some materials produce airborne contaminants or suspended particles when cut. Wear approved
respiratory protection.
Examine and clean the equipment regularly. Make repairs immediately.
Keep the work area clean and free of fluid spills.