Powermax105 Operator Manual 6-9
Choose the machine torch consumables
Powermax systems with the Duramax 180° full-length machine torch or Duramax 180° mini machine torch are shipped
with a box of consumables. In addition, an ohmic-sensing retaining cap is available for use with shielded consumables.
With shielded consumables, the torch tip may touch the metal when cutting. With unshielded consumables, you must
keep the torch a small distance, about 2-3 mm (.08-.12 inch), away from the metal. Unshielded consumables generally
have a shorter life than shielded consumables. Depending upon which system you order, you may receive a starter
consumable kit with a standard retaining cap or ohmic retaining cap.
Both styles of machine torches use the same consumables.
Machine torch consumables
Mechanized shielded 105 A consumables
Mechanized shielded 45 A, 65 A, 85 A consumables
220993
Shield
220854
Retaining cap
220994
Swirl ring
220842
Electrode
220990
Nozzle
220817
Shield
220854
Retaining cap
220994
Swirl ring
220842
Electrode
220941
Nozzle
220819
Nozzle
220816
Nozzle
To Next Page
Loading...
Need help?
General
