Hypertherm powermax1650 - Installing Consumables

OPERATION
0
powermax1650 Operator Manual 4-3
WARNING
Instant-On Torches
PLASMA ARC CAN CAUSE INJURY AND BURNS
The plasma arc comes on im me di ate ly when the torch switch is
activated. The plasma arc will quickly burn through gloves and skin.
Make sure the power is OFF before changing the consumables.
Install the consumables
Note: Hand tighten only.
Retaining cap
Nozzle
Electrode
Swirl ring
Shield
2
1
The instructions for hand torches are shown below. If you are using a machine torch, you may need
to install it on the cutting table prior to installing the consumables.