Hyster F007 - Page 29

5000 SRM 969 Maintenance
Table 2. Maintenance Schedule
Item
No.
Item
250 Hr/
1Mo
500 Hr/
3Mo
1000 Hr/
6Mo
2000 Hr/
1Yr
Procedure or
Quantity
Specification
1
Wear Pads for
Main Beams and
Extension Beams
XL Check for
wear of 14
nylon pads and
replace before
metal-to-metal
contact between
carriage and
frame occurs.
Apply grease
to new pads
or in cases
where there is
screeching noise.
Multipurpose
Grease
1
2
Extension Cylinder
Support Wear Pads
X Check for
wear of four
nylon pads and
replace before
metal-to-metal
contact between
carriage and
frame occurs.
3
Upper Sideshift
Slider Pads
X Check for wear of
nylon pads and
replace before
metal-to-metal
contact between
carriage and
frame occurs.
4
Twist Lock
Housings
Model 553
X Check for wear
and possible
damage of twist
lock and twist
lock housing.
Replace if
damaged.
4
Lifting Hooks
Model 555
X Check hooks for
wear or cracking.
If any sign of
either defect is
suspected, hooks
should either
be replaced or
nondestructive
crack tested.
X=CheckC=ChangeL=Lubricate
1
Multipurpose grease with 2-4% molybdenum disulfide.
23