18
6.3.3 Ending an All Call
An all call ends when the calling party releases the PTT key.
6.4 Phone Call
A phone call is a call between a radio and a phone. After a repeater accesses the PSTN/PABX system through a
PSTN/PABX gateway, the radio can communicate with the phone through the repeater.
6.4.1 Initiating a Phone Call
Through Contact List
1. Go to Menu > Contact/Favorite, or press the preprogrammed Contact List or Favorite Contact List key.
2. Select the phone contact.
3. Press and hold the PTT key.
Through Manual Dialing
With the phone call dial permission enabled by your dealer, on the home screen, enter the phone number, select
DTMF Dial, and then press and hold the PTT key.
The phone number must comply with the dialing rules. For details, consult your dealer.
6.4.2 Receiving a Phone Call
When receiving a phone call, press (with the One-Key Connect feature enabled) or enter the connect code
to join the phone system. Then you can answer the phone call.
6.4.3 Ending a Phone Call
A phone call ends in either of the following cases:
The calling party hangs up.
The called party presses (with the One-Key Disconnect feature enabled) or enters the disconnect code.
6.5 Call on Analog Channel
You can initiate or receive a call on an analog channel with or without signaling.
6.5.1 Call Without Signaling
On an analog channel without signaling, you can initiate a call to all the other users on the channel.
To Next Page
Loading...
Need help?
General
