28
8.3.1 Switching the Profile
Go to Menu > Profiles, and then select the profile.
Press the preprogrammed Profiles Switch key.
8.3.2 Setting the Alert Tone
To enable or disable the alert tone, go to Menu > Profiles > Settings > Tone > On/Off.
To adjust the alert tone volume, go to Menu > Profiles > Settings > Tone > Tone Volume, and then select
the volume level. Higher level represents higher volume.
8.3.3 Audio Settings
Mic AGC
The Mic AGC feature allows the calling radio to control the voice output gain within a proper range during
transmission, so as to provide improved voice with proper volume for the called radio. This feature ensures stable
voice even in a noisy environment.
Go to Menu > Profiles > Settings > Audio Set> Digital Mic AGC/Analog Mic AGC, and then enable the
feature.
Noise Suppression
The Noise Suppression feature allows the radio to automatically eliminate ambient noise when receiving or
transmitting voice. This feature enhances the voice clarity, while also decreases the volume.
With this feature enabled by your dealer, go to Menu > Profiles > Settings > Audio Set > Noise Suppression,
and then enable the digital noise suppression.
8.4 Scan
The Scan feature allows you to listen to activities on other channels, keeping track of your team members.
8.4.1 Enabling the Scan Feature
Go to Menu > Scan > Scan On/Off.
Press the preprogrammed Scan key.
With this feature enabled, the radio scans according to the scan list preset for the current channel. The LCD
displays , and the LED indicator flashes orange slowly. When detecting activities on a channel, the radio
stays on the channel. The LED indicator glows green. If the radio stays on a non-priority channel, the LCD
displays . If the radio stays on Priority Channel 1 or Priority Channel 2, the LCD displays or .
To Next Page
Loading...
Need help?
General
