Hytera HP68X - 6.4.2 Receiving a Phone Call; 6.4.3 Ending a Phone Call; 6.5 Call on Analog Channel

19
On the home screen, press and then rotate the Smart knob to select the analog channel, and then press and hold
the PTT key.
6.5.2 Call with Signaling
On an analog channel with signaling, you can initiate a call to a specific contact on the channel. Do as follows:
1. Go to Menu > Contact, or press the preprogrammed Contact List key.
2. Select the contact.
3. Press and hold the PTT key, or press the preprogrammed One Touch Call/Menu key.