32
Go to Menu > BT > Auto Search, and then select the BT device from the detected device list.
After the radio is connected to the BT device, the LED indicator of the radio flashes blue every 1.5 seconds.
8.6.2 BT Audio Switch
With the BT device connected, you can press the preprogrammed BT Audio Switch key to switch the audio
output device between BT earpiece and the radio.
8.6.3 Setting the BT
Changing BT Name
Go to Menu > BT > My Device > BT Devices Name, and then enter the new name.
Setting Visibility
Go to Menu > BT > My Device > Always Detected, and then enable the feature.
Other BT devices can detect the radio.
8.7 One Touch Call/Menu
The One Touch Call/Menu feature allows you to quickly initiate a preset service by pressing the preprogrammed
One Touch Call/Menu key.
The following table shows the services that can be implemented by this feature and the corresponding operations.
Description Operation
On an analog channel, you can initiate a call to a 2-tone
contact.
Use the numeric keypad to initiate the service.
1.
Go to Menu > Settings > Basic Settings >
Keypad Mode, and then select One Touch
Call/Menu.
2.
On the home screen, press the numeric key to
initiate the service.
Press the preprogrammed One Touch
Call/Menu key to initiate the service.
While initiating a call on a digital channel, you
need to press and hold the PTT key after
pressing the One Touch Call/Menu key.
On a digital channel, you can do any of the following:
Initiate a group, private, or all call.
Send a quick text message or position message to a
private or group contact.
Initiate an alert call, radio check, remote monitor,
radio enable, or radio disable service.
Switch to a function menu or realize a function.
To Next Page
Loading...
Need help?
General
