26
Man Down
The Man Down feature allows the radio to automatically enter the emergency mode in either of the following
scenarios:
The radio is inclined by an angle greater than the preset angle.
The radio keeps motionless (including moving at a constant speed) longer than the preset time.
You can place the radio upright or move it to exit the emergency mode.
To enable this feature, do either of the following:
Go to Security > Man Down.
Press the preprogrammed Man Down key.
Lone Worker
The Lone Worker feature allows the radio to automatically send an emergency alarm to your companion or the
control center in either of the following scenarios:
You do not operate the radio within the preset time.
The radio does not transmit voice within the preset time.
You can press the keys, rotate the knob, or transmit voice to exit the emergency mode.
To enable this feature, do either of the following:
Go to Security > Lone Worker.
Press the preprogrammed Lone Worker key.
8.1.4 Checking the Product Information
Go to Menu > Settings, and then do any of the following:
Select Device Information, and then check the information of the battery.
Select Radio Information, and then check the radio ID, serial number, model name, frequency range, and so
on.
With the QR Code feature enabled by your dealer, select QR Code, and then scan the QR code to quickly
obtain the radio information.
To Next Page
Loading...
Need help?
General
