indications. The icon indicates that the battery runs low. In this case,
please recharge or replace the battery.
Icon LED Indication/Tone
The LED indicator glows green.
The LED indicator glows orange.
The LED indicator glows red.
The LED indicator glows red and an alert tone sounds.
Locking or Unlocking Keys and Knobs
When the keypad is not in use, it is recommended that you lock it to avoid
accidental operations.
To lock or unlock the keypad, do one of the following from the home
screen:
l Press the preprogrammed Keypad Lock key.
l Press the OK/Menu key and then press
.
To allow the keypad to be locked automatically, enable the Keypad Lock
feature as follows:
1. Go to Menu > Settings > Radio Set > Keypad Lock.
2. Select Enable, and set Delay Time by pressing the Up or Down key.
In addition, you can go to Menu > Settings > Radio Set > Optional Key to
set whether the corresponding keys and knobs still work when the keypad is
locked.
Using the Keypad
You can use the keypad to enter user aliases or IDs and text messages.
l To switch the input method between alphabetic mode and numeric
mode, press
.
l To enter special characters, press
in alphabetic mode or in
numeric mode.
l To enter a space, press in alphabetic mode.
Switching the Operation Mode
The radio can operate in conventional mode or trunking mode. In
conventional mode, you can receive and transmit voice and data after
selecting the required channel. In trunking mode, you can receive and
transmit voice and data after the radio registers successfully.
To switch the operation mode, do one of the following:
l Go to Menu > Mode > Manual Switch, and then select the required
mode.
l Press the preprogrammed Operation Mode Switch key.
To allow the radio to automatically switch to a mode based on signal
strength, go to Menu > Mode > Auto Switch, and then select Enable.
9
To Next Page
Loading...
Need help?
General
