Control Services
On the digital channel in conventional mode, you can initiate the following control services to a private contact.
Feature Description Operation
Alert Call
Allows you to alert a private contact to call you
back.
To trigger the corresponding feature, do one of the following:
l Through Favorites / Contact List
1. Go to Menu > Contact > Favorites / Contact List.
2. Select the target private contact.
3. Go to Ctrl Services > Alert Call / Radio Check / Remote Monitor / Radio Enable /
Radio Disable.
l Through Keypad Mode
1. Go to Menu > Settings > Radio Set > Keypad Mode, and then select Enable.
2. Press
to switch the input mode to Private ID.
3. From the home screen, enter the target private ID using the keypad , and then press
the OK/Menu key.
4. Go to Ctrl Services > Alert Call / Radio Check / Remote Monitor / Radio Enable /
Radio Disable.
Radio Check
Allows you to check whether another radio is
operating on the current channel without
disturbing that radio user.
Remote
Monitor
Allows you to remotely monitor activities
surrounding another radio.
Radio Enable
Allows you to remotely enable a disabled radio
for normal operation.
Radio Disable Allows you to remotely disable another radio.
35
To Next Page
Loading...
Need help?
General
