Hytera PD68X User Manual

Mode Manner Operation
List.
2. Select the target phone contact.
3. Press
or press and hold the PTT key
to initiate the call.
ReDial/BackDial
Call Log
1. From the home screen, press
or
(if preprogrammed as the ReDial or
BackDial key).
2. Select the target phone contact from
the list.
3. Press or press and hold the PTT key
to initiate the call.
Receiving a Phone Call
Conventional Mode
When receiving a call from a phone, you need to transmit the
preprogrammed connect code to access the telephone system as described
in Initiating a Phone Call.
After the radio accesses the telephone system successfully, the call is
established automatically.
Trunking Mode
When you receive a call from a phone, the radio displays
. To answer
the call, press or press and hold the PTT key within the preset period.
After the call is established successfully, the radio displays .
Ending a Phone Call
In conventional mode, a phone call ends in any of the following cases:
l You transmit the preprogrammed disconnect code in the same way as
the connect code.
l The phone user hangs up.
In trunking mode, a phone call ends in any of the following cases:
l The calling or called party ends the call.
l The call duration exceeds the period preset by your dealer.
l A preemptive or emergency call interrupts the call.
l The base station signal is lost.
All Call
Conventional Mode
An all call is a call from an individual user to all other users on the current
channel.
18

Hytera PD68X Specifications

General

Brand	Hytera
Model	PD68X
Category	Portable Radio
Language	English