Hytera PD68X User Manual

initiate or receive a call to or from a PSTN or Private Automatic Branch
eXchange (PABX) terminal.
Initiating a Phone Call
The following table describes how to initiate a phone call in conventional
mode and trunking mode.
Mode Manner Operation
Conventional
Manual Dial
1. Go to Menu > Phone > DTMF
Keypad, and then select Enable.
2. Access the phone system in one of the
following manner:
l From the home screen, enter the
preprogrammed connect code using
the keypad, and then press and hold
the PTT key.
l If the One-Key Connect feature is
enabled, press
to transmit the
connect code.
After accessing the phone system
successfully, the radio enters the
DTMF Dial mode.
3. From the home screen, enter the phone
number using the keypad.
Mode Manner Operation
4. Press and hold the PTT key to initiate
the call.
Contact List
1. Enable the DTMF keypad and access
the phone system as described above.
2. Go to Menu > Phone > Phone
Contact, and then select the target
phone contact.
3. Press and hold the PTT key to initiate
the call.
Trunking
Favorites /
Private Contact
1. Go to Menu > Contact > Favorites /
Private Contact.
2. Select the target phone contact.
3. Press
or press and hold the PTT key
to initiate the call.
Manual Dial
1. Go to Menu > Settings > Radio Set >
Keypad Mode, and then select Enable.
2. From the home screen, enter the phone
number using the keypad.
3. Press
or or press and hold the
PTT key to initiate the call.
Call Log
1. Go to Menu > Call Logs >
Outgoing/Incoming/Missed >
Outgoing List / Incoming List / Missed
17

Hytera PD68X Specifications

General

Brand	Hytera
Model	PD68X
Category	Portable Radio
Language	English