Hytera PD68X User Manual

Trunking Mode
An all call is a call from an individual user to all other users in a specific BS,
area, or system.
According to whether the called party can respond, the all call is classified
into the following two types:
l Broadcast All Call: The called party cannot respond to the call.
l General All Call: The called party can respond to the call.
To set the type, go to Menu > Settings > Radio Set > All Call, and then
select Broadcast Call or General Call.
The radio must be authorized by your dealer for you to initiate an all
call.
Initiating an All Call
The following table describes how to initiate an all call in conventional
mode and trunking mode.
Mode Manner Operation
Conventional
Preset Contact
1. Rotate the Channel Selector knob to
select the channel associated with the
all call contact.
2. Press and hold the PTT key to initiate
the call.
Contact List
1. Go to Menu > Contact > Contact List.
2. Select the all call contact.
3. Press and hold the PPT key to initiate
the call.
Trunking
Manual Dial
1. Go to Menu > Settings > Radio Set >
Keypad Mode, and then select Enable.
2. From the home screen, enter the all call
number using the keypad.
3. Press
or or press and hold the
PTT key to initiate the call.
ReDial Call Log
1. From the home screen, press
(if
preprogrammed as the ReDial key).
2. Select the all call log from the list.
3. Press or press and hold the PTT key
to initiate the call.
19

Hytera PD68X Specifications

General

Brand	Hytera
Model	PD68X
Category	Portable Radio
Language	English