This document applies to the LITHIUM SERIES® II Electric Torque Tools, model designations as follows;
Models: LST
Conigurations: , , , ,
Option: U or USB Version i speciied
Custom options: zzzz i speciied
Notice. The inormation contained in this document is subject to change without notice. HYTORC makes no warranty o any kind
with regard to this material, including but not limited to, the implied warranties o merchantability and itness or a particular purpose.
HYTORC shall not be liable or errors contained herein or or incidental or consequential damages in connection with the urnishing,
perormance, or use o this material. It is urther recommended that the enduser or repair technician insure they have obtained and are
amiliar with the latest revision o the manual or the equipment outlined in this document.
Restricted Rights Legend. Use and duplication o the inormation contained within this manual is limited to the purchaser, end user,
or licensed HYTORC representative. It is recommended that proper training or the equipment outlined in this manual be conducted by
a HYTORCauthorized training representative or any person who is operating or repairing the equipment outlined in this document.
Modiication o, or disclosure by any other agency or representative is strictly orbidden.
Product Modiications. HYTORC DOES NOT ALLOW any o the products listed in this manual to be modiied by any end user without
exception. Should an application require a modiication to the tool, or any o the standard accessories please consult with your local
HYTORC representative and they will be able to obtain the assistance or any modiication that may be required.
LITHIUM SERIES® II is a registered trademark o HYTORC.
Copyright © HYTORC All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is
prohibited, except as allowed under the copyright laws.
NOTE: This equipment has been tested and ound to comply with the limits or a Class B digital device, pursuant to part 5 o the
FCC Rules. These limits are designed to provide reasonable protection against harmul intererence in a residential installation. This
equipment generates, uses and can radiate radio requency energy and, i not installed and used in accordance with the instructions,
may cause harmul intererence to radio communications. However, there is no guarantee that intererence will not occur in a particular
installation. I this equipment does cause harmul intererence to radio or television reception, which can be determined by turning the
equipment of and on, the user is encouraged to try to correct the intererence by one or more o the ollowing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diferent rom that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician or help.
ORIGINAL INSTRUCTIONS
ABOUT THIS DOCUMENT
To Next Page
Loading...
Need help?
General
