What to do if my Hytorc Stealth 2 ratchet does not take successive strokes?
If the ratchet does not take successive strokes, the square drive or the ratchet spring may be defective, requiring replacement. Also, ensure the piston fully retracts. Another possible cause is damage to the linkage between the piston rod and the drive plates, which would also require replacing the defective part.
Why does my Hytorc Stealth 2 lock onto the nut?
If the tool locks onto the nut, it is likely that the square drive is loaded at full torque. Use the disengagement lever to remove the tool from the nut or bolt.
Why does ice build up at the exhaust of my Hytorc Power Tool?
If ice builds up at the exhaust, the ambient temperature is likely too low. Wait 5-10 minutes to let the ice melt.
Outlines fundamental safety rules for personnel, work areas, and equipment.
Provides specific safety guidelines for pump units, hoses, reaction arms, and sockets.
Describes the electric pump unit, its components, and LED indicators.
Details the pneumatic pump unit, its components, and LED indicators.
Explains the wrench mechanism and its associated accessories.
Guide to setting torque and performing bolted flange connections.
Solutions for common problems encountered with the hydraulic wrench.
Solutions for common problems with electric and pneumatic pump units.
Tables listing maximum torque for various nuthead and hex drive sizes.
General| Brand | Hytorc |
|---|---|
| Model | Stealth 2 |
| Category | Power Tool |
| Language | English |
To Next Page