AFE1_AFE2-1:1
I-jet Trace
49
The adapter has the MIPI-20 male header on top for connecting the I-jet Trace CM
MIPI-20 cable and the Mictor-style male header that straddles the edge of the PCB. This
Mictor connector (AMP/Tyco 576006-1) mates with target boards with a female Mictor
connector with pitch size 0.025 in (0.064 mm). You can, for example, use AMP/Tyco
5767054-1. These connectors are keyed to prevent incorrect insertion.
Signal Pin Pin Signal
12
34
Table 20: ADA-MIPI20-MICTOR adapter pinout
To Next Page
Loading...