IBASE Technology IB895 - Chipset Settings

BIOS SETUP
IB895 User’s Manual 27
iSmart Controller
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
iSmart Controller
EuP/ErP standby power Control Keep standby power
Power-On after Power failure Disable
Schedule Slot 1 None
Schedule Slot 2 None
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Opt
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save & EXIT
E
SC: Exit
EuP/ErP standby power Control
Saving the power consumption on power off.
Power-On after Power failure
This field sets the system power status whether on or off when power
returns to the system from a power failure situation.
Schedule Slot
None / Power On / Power On/Off – Setup the hour/minute for system
power on
IDE Configuration
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
SATA Port0 Not Present
SATA Port1 Not Present
SATA Controller(s) Enabled
Configure SATA as IDE
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Opt
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save & EXIT
ESC: Exit
SATA Controller(s)
Enable / Disable Serial ATA Controller.
Configure SATA as
(1) IDE Mode.
(2) AHCI Mode.