To Next Page

To Previous Page

Note

For safety reasons, a switch is built into the door. The switch prevents the fan from operating if the

door is not installed. With the door removed, the unit's control board will remain powered, so that

installers can use the mobile app to program the unit.

3.4 Operating the unit with a mobile app

All AHU units come set with default factory settings. IBC's free mobile app "IBCconnect" (Android or iOS app)

enables users to monitor and adjust default settings in a single air handling unit. This app is compatible only

with Android and iOS devices and with the IBC AHU.

Note

Alternatively, it's possible to change settings using a USB stick with a custom configuration text

file. Using a USB with a custom text file is the best approach for configuring multiple air handlers

that will use the same settings (see Configuring settings and parameters via a USB text file on

page 49).

3.4 Operating the unit with a mobile app

Other manuals for IBC AHU Series

Questions and Answers:

Need help?

Do you have a question about the IBC AHU Series and is the answer not in the manual?

General