IBC AHU Series Installation And Operating Manual

53
4.0 Service and maintenance
The IBC air handling unit is designed for durability and easy access to the main components: control board,
fan assembly, hot water coil assembly, and filter. Over time, components such as sensors may require
replacing and servicing. Note that failure to use the correct procedures or parts could result in unsafe
operation.
4.1 Maintenance checklist for owners
Owners should arrange follow-up inspections and simple maintenance procedures according to IBC's
suggested servicing guidelines below.
Maintenance Required Frequency Check
Check and replace filter as needed. Replace the filter monthly.
Inspect system for unusual noises. Call your local heating contractor for
service if needed
Monthly
□
Have your local heating contractor inspect the system annually.
This service should include the heat appliance connected to the Air
Handling Unit.
Annually
□
4.2 Maintenance for the heating contractor
4.2.1 Removing the fan assembly
1.
Remove the two screws from the front cover,
and set aside.
2.
Remove the two bolts from the fan assembly
plate.

IBC AHU Series Specifications

General

Brand	IBC
Model	AHU Series
Category	Air Handlers
Language	English