IBC AHU Series Installation And Operating Manual

With the AHU cover off, the LEDs on the circuit board will start blinking simultaneously in a ON-
OFF-ON-OFF-OFF-OFF pattern when connected.
4. Tap the device's back button to return to the IBCconnect app, then tap GET STARTED to access
the Home page to start adjusting settings.
3.4.2.2 Connecting an iOs device
The IBCconnect app requires an IBC-AHU WiFi connection. You need to change some app settings after
installation.
1. In the main iPhone settings, select Cellular.
2. Scroll down to IBCconnect (under Cellular Data), and set to Off.
3. Navigate to the device’s WiFi Settings.
4.
Connect to the IBC-AHU WiFi.
The IBC-AHU will appear in the device’s list of WiFi Access Points as “IBC-AHU-xxxxx”, where
“xxxxx” is the serial number of the controller in the IBC-AHU. If there are multiple IBC-AHU’s in the
area, the unit with the strongest signal will likely be the controller you want to connect to.
5. Select IBC-AHU-xxxxx.
6.
The first time you connect, enter 1234567890 when prompted for a password.
46
Section: Operation

IBC AHU Series Specifications

General

Brand	IBC
Model	AHU Series
Category	Air Handlers
Language	English