Iberital EXPRESSION TWO User Manual

IBERITAL
Page 52 INSTALLATION AND OPERATION MANUAL
ENGLISH
xxxºC hh:mm
User MENU display: When the co ee machine switch is in position 2 and the display in the ON position (on the
screen the name entered will be shown), press the MENU or TWO COFFEES button on the left button pad
(based on the display used) for at least 5 seconds, and enter the user level programming mode.
Technical MENU display: When the co ee machine switch is in position 2 and the display in the OFF position (on
the screen the word OFF will be shown), press the MENU or TWO COFFEES button on the left button pad (based
on the display used) for at least 10 seconds, and enter the technical level programming mode.
IMPORTANT: Once inside the MENU, pressing on the MENU or NON-STOP button on the left button
pad (based on the display used) allows you to move through the display functions. Pressing the OK or TWO
ESPRESSOS button (based on the display used) will confi rm the chosen function and confi rm the changes.
To change between two functions, the UP or ONE ESPRESSO button moves you up an option, and the DOWN
or ONE COFFEE button (based on the display used) will drop you down an option. (See image in sections 2.9.1
and2.9.2.)
2.9.4. User menu display
- Programming the TIME and weekly ON/OFF for the machine:
When the words SET CLOCK appear, confi rm the selection by pressing the OK button. The programming of the time
and day of the week is very important, because this information will be used by the control unit for the weekly ON/OFF
activation of the machine.
Set Clock
HH.MM.xxxxxxx
Press the UP/DOWN buttons to change the HOURS and press OK to confi rm and move on to the MINUTES and the
day of the week. After confi rming the day of the week, it will automatically go into the weekly ON/OFF programming
mode.
Auto On/Off
AAA:hh.mm
Pressing the UP/DOWN buttons will vary the HOURS until the desired hour is found, and then you must press the
OK button to confi rm the selection and move on to the option of MINUTES (mm), carrying out the same operation
when the word OFF appears and the rest day.
IMPORTANT: So that the machine does not come on automatically, enter (--) hyphens in the selection of HOURS
(hh.mm) for ON and OFF and the rest day.
- Visualization of the counters:
Counters
In this section all consumption levels may be read.
- Press the OK button and the display will show:
Litres
xxxxxx
Showing the number of litres of water consumed to date.
HH: Hours
MM: Minutes
xxxxxxx: Day of the week
AAA: ON
OFF
hh: On/off hours
mm: On/off minutes

Iberital EXPRESSION TWO Specifications

General

Brand	Iberital
Model	EXPRESSION TWO
Category	Coffee Maker
Language	English