EasyManuals Logo

Iberital EXPRESSION TWO User Manual

Iberital EXPRESSION TWO
Go to English
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
IBERITAL
INSTALLATION AND OPERATION MANUAL Page 53
ENGLISH
- Press the MENU button and the display will show:
Service
xxxxxx
Showing the number of cycles to date. (Activations for any of the dose selections.)
- Press the MENU button and the display will show:
Coffees total
xxxxxx
Showing the total number of co ees dispensed to date.
IMPORTANT: In order to erase the total number of co ees and reset the counter to zero for the total number of
co ees, press the ‘2 co ees’ and ‘2 espressos’ buttons on GROUP 1 (on the left).
The display will then show:
Coffees total
Total reset
NOTE: Erasing the total co ee count does not erase the reading for the litres of water consumed. To eliminate
the alarm for CHANGE/REPLACE FILTER for the litres of water consumed, see the section WATER FILTER
CHANGE/REPLACEMENT ALARM.
- Press the MENU button and the display will show:
zzzzz GR:
xxxxxx
Showing the number of co ees by dose and by group.
Continuing to press the MENU button will show the number of co ees by selection.
NOTE: The individual counter for co ee dose type (1 espresso, 1 co ee, etc.) cannot be erased.
2.9.5. Technical menu display
Remember that to access the Technical MENU, the display must be in the OFF position (the display will show the
word OFF). If it is in the ON position (the display will show the name entered), in order to access the OFF mode,
press the I/O (ON/OFF) or NON-STOP button on the left button pad and, while pressing it, also press the
TWOESPRESSOS button on the left button pad immediately after (based on the display used).
Once in OFF mode, in order to access the technical menu, you must press the NON-STOP button on the left
button pad or the MENU button for around 10-15 seconds (based on the display used) and go into technical level
programming mode.
- The rst option which appears is:
Language
xxxxxx
Where you can select the language (English, French, German, Spanish) via the UP/DOWN buttons. Once the desired
language has been selected, press the MENU button and move on to the following option:
zzzzz: 1 espresso, 1 coffee, etc.
GR: Group 1/2/3
xxxxx: No. of coffees

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Iberital EXPRESSION TWO and is the answer not in the manual?

Iberital EXPRESSION TWO Specifications

General IconGeneral
BrandIberital
ModelEXPRESSION TWO
CategoryCoffee Maker
LanguageEnglish

Related product manuals