AS/400e server 250
110 AS/400e System Handbook
• A display unit must be connected to the Integrated Netfinity Server to support
Windows NT
• A minimum of 64M IOP memory on the Integrated Netfinity Server
For keyboard/mouse and display support in countries outside the USA, consult the Internet
at:
http://www.as400.ibm.com/windowsintegration/ntins.htm
9406 Model 250 System Unit
Power and Packaging
The base system contains a planar, which combines both the processor and MFIOP in one
card. The Base Disk Controller (CCIN 9728) is embedded on the backplane. The MFIOP
provides support for two low speed PCI card slots and one high speed PCI card slot (used for
the optional disk controller). It also drives one Integrated Netfinity Server (#2866) or one
additional high speed slot.
Notes:
1. No high-speed LAN is allowed in Slot C09.
2. If any LAN is in Slot C03, no LAN card is allowed in Slot C09.
9406 Model 250 System Unit
9406 Model 250 System Unit
PCI Card Placement
PCI 2-Line WAN w/Modem #9771
OP Panel
340 Watt Power Supply
PROCESSOR
MFIOP
C09
C08
C07
C06
C05
C04
C03
C02
Slots
Integrated Server Bridge Card
(reserved) )
PCI Cards
ECS & Console #9720/#0398
Integrated Server LAN Slot
Integrated Server LAN Slot
High Speed Slot
Integrated Server Proc. Card #2866
Disk Cont. #2763/#2748
D02
D01
CD-ROM
Magnetic Media
Disk Unit
Disk Unit
Disk Unit
Disk Unit
L01
L02
L03
L04
Base Memory Base Memory
**
Memory DIMMs plug directly to the planar
and must be added in pairs.
Slot
C08
C09
C06
C07
C05
C04
C03
C02
PCI 2-Line WAN w/Modem #9771 (Note 8)
WAN/Twinax IOA #9720 or
Operations Console Package #0398
Disk Controller #2763/#2748
Integrated Server LAN Slot
Integrated Server High Speed LAN Slot
Integrated Server Bridge Slot (reserved)
LAN / WAN slot (Notes 4 and 7)
Integrated Server Proc Slot #2866
Embedded MFIOP
To Next Page
Loading...
Need help?
General