Peripherals 429
Peripherals
configuration provides support for users at remote sites, saving the time and trouble of site
visits and preventing misinterpretation of configuration instructions.
The 7852-400 includes dial back-up with automatic lease line restore, adaptive protocol
enhancing used in typical UNIX batch file transfers, and support for the AS/400 and System
3X environment.
The 7852-400 meets the ITU V.17 standard for sending and receiving faxes. When linked to a
compatible fax machine or modem, it can transmit faxes at 14.4 Kbps. It also meets ITU
Group 3 Designation for 9.6 Kbps and Group 2 for 4.8 Kbps. It is downward compatible with
modems to speeds as low as 300 bps, making it compatible with virtually any fax machine in
the world.
Support for this modem varies depending upon approved standards and other
country-specific telecommunications regulations. For further information, contact your local
IBM representative.
IBM AS/400 Printers
IBM AS/400 printers are designed, built, tested, and supported as an integrated component
of the AS/400 system. Printer options are scalable from desktop to production, impact to
laser, and 375 characters per second to 1002 impressions per minute. The printer section is
divided into three general areas:
• Workgroup Printers
• Departmental and Production Printers
• Industrial Printers
AS/400 print application information is found on the AS/400 printing Web site at:
http://www.ibm.com/printers/as400
IBM AS/400 Workgroup Printers
IBM InfoPrint and IBM Network Printers are a family of high-performance laser printers
designed for AS/400 and network printing environments. These printers include the Network
12, Network 17, InfoPrint 20, InfoPrint 21, InfoPrint 32, and the InfoPrint 40 advanced
network printers. As a group, they provide 600 dots-per-inch (dpi) quality, multiple concurrent
connections, support for multiple print datastreams (IPDS, Postscript, PCL), and a wide
range of paper handling options. In addition, the InfoPrint Color 8 provides high-fidelity,
full-color printing for both AS/400 and workgroup applications.
To create an Intelligent Printer Data Stream (IPDS) printer on the AS/400 system, you must
(after specifying the device type as IPDS) specify AFP(*YES) in the printer device
description. Any printer defined as Type (*IPDS) and AFP (*YES) needs the Print Services
To Next Page
Loading...
Need help?
General