I/O Processor 243
I/O Processor
• #2749 - PCI Ultra Magnetic Media Controller
• #2768 - PCI Magnetic Media Controller
• #4723 - PCI Ethernet/IEEE 802.3 Adapter
• #4745 - PCI WAN IOA
• #4746 - PCI Twinaxial IOA
• #4748 - PCI RAID Disk Unit Controller
• #4750 - PCI ISDN BRI U IOA
• #4751 - PCI ISDN BRI S/T IOA
• #4761 - PCI Integrated Analog Modem
• #4801 - PCI Crypto Coprocessor
• #4815 - PCI ATM 155 Mbps UTP OC3
• #4816 - PCI ATM 155 Mbps MMF
• #4818 - PCI ATM 155 Mbps SMF OC3
• #4838 - PCI 100/10 Mbps Ethernet IOA
• #9771 Base PCI 2-Line WAN with Modem
The #2843/#9943 can drive a maximum of four IOAs. Refer to “PCI Card Placement Rules”
on page 279 for details.
#2790 PCI Integrated Netfinity Server
The #2790 PCI Integrated Netfinity Server contains a 700 MHz slot 1 processor and four
Netfinity IOP Memory slots.
#2790 is supported in the CEC of Models 820, 830, 840, SB2, and SB3, in the #5074 PCI
Expansion Tower, in the #5079 1.8M I/O Tower, and in the #5075 PCI Expansion Tower when
it is attached to the Model 820.
Each memory slot can contain either a 128 MB, a 256 MB, or a 1024 MB Netfinity IOP
Memory card. This provides a total memory capacity ranging from 128 MB to 4 GB.
Note: When the maximum memory is installed, only 3712 MB will be addressable.
At least one Netfinity IOP Memory card is required.
The feature numbers of the Netfinity IOP Memory cards are:
• #2795 - 128 MB Netfinity IOP Memory
• #2796 - 256 MB Netfinity IOP Memory
• #2797 - 1 GB Netfinity IOP Memory
To Next Page
Loading...
Need help?
General