I/O Processor
248 AS/400e System Handbook
Migration Tower Hardware SPD
#2629 SPD LAN/WAN/Workstation IOP
This adapter uses one SPD slot. It supports up to three of the following IOAs:
• #2699 Two-Line WAN IOA
• #6149 16/4 Mbps Token-Ring IOA
• #6180 Twinaxial Workstation IOA
• #6181 Ethernet/IEEE 802.3 IOA
One #2629 supports any combination of adapters with one restriction. There is a maximum of
two LAN IOAs.
Up to seven #2629s can be placed into each 1063 Mbps System Unit Expansion Tower
#5072. The #2629 is not allowed in slot 14 of the #5072 tower. No restrictions apply when
using #2629 with a #5073 tower.
#2810 LAN/WAN IOP
This IOP is used in SPD cages for attaching the #2838 PCI 100/10 Mbps Ethernet IOA or one
of the #281x PCI ATM IOAs. It is a high workload IOP and has configuration limitations.
#6616 Integrated PC Server (formerly known as FSIOP)
The #6616 Integrated PC server contains a 166 MHz Pentium processor, two IOP memory
slots, and two LAN IOA slots. Supported for migration only.
#6617 Integrated PC Server
The #6617 Integrated PC server contains a 200 MHz Pentium processor, two IOP memory
slots, and three LAN IOA slots. Supported for migration only.
#6618 Integrated Netfinity Server
The Integrated Netfinity Server contains an Intel 333 MHz Pentium II processor, four main
storage slots, and three LAN IOA slots. The IPCS provides high-performance LAN serving to
LAN-attached PCs. OS/2 Warp Server for AS/400, Novell IntraNetWare, Lotus Domino,
Flowmark, Firewall for AS/400, and Windows NT server are supported on the Integrated
Netfinity Server.
The #6618 Integrated Netfinity Server requires three IOP slots. It comes with no base main
memory and supports up to four of the following memory features allowing between 32 MB
and 1024 MB of memory.
To Next Page
Loading...
Need help?
General