AS/400e server SB3
202 AS/400e System Handbook
• Bus Adapter (CCIN 2681)
• Operator Panel (CCIN 247A)
• #9943 Base PCI IOP
– Provides support for #9748 Base PCI RAID Disk Unit Controller
Provides support for eight disk units, the required CD-ROM, and a feature internal
tape or a feature CD-ROM.
– Provides support for base Console/Workstation IOA
The configurator will determine which feature combinations will be on the order based
on the System Console specify—#5540 or #5544.
The following required features must be purchased:
• Processor (one must be specified)
– #2316 12-way processor (IStar) (10000 CPW)
– #2318 24-way processor (IStar) (16500 CPW)
• Integrated Disk Units
Device Parity Protection: All (0041) is the default for disk data protection but may be
removed. With processor #2316, a minimum of four and a maximum of six of the following
disk units must be on the order. If six of the 17.54 GB disk units are on the order, RAID or
mirroring is required to meet the maximum logical disk unit capacity limit. With processor
#2318, a minimum of four and a maximum of eight of the following disk units must be on
the order. If eight 17.54 GB disk units are on the order, RAID or mirroring is required to
meet the maximum logical disk unit capacity limit.
– #4314 - 8.58 GB Disk Unit
– #4317 - 8.58 GB 10k RPM Disk Unit
– #4318 - 17.54 GB 10k RPM Disk Unit
– #4324 - 17.54 GB Disk Unit
• Integrated CD-ROM
#4425 - CD-ROM
• System Console/Communications Adapter
– #5540 System Console on twinaxial workstation controller
• #4746 PCI Twinaxial IOA
• #9771 Base PCI 2-Line WAN with Modem
– #5544 System Console on Operations Console
• #0367 Operations Console PCI Cable
• #4745 PCI Two Line WAN IOA
• #9771 Base PCI 2-Line WAN with Modem
To Next Page
Loading...
Need help?
General