IBM AS/400e

Summary of All Earlier AS/400 Models 739
Summary of All Earlier AS/400 Models
Note 3: One line is used for Client Access Console or Operations Console if selected. The maximum is nine if Twinaxial
Console is selected.
Note 4: The #9364 must be configured with #9329 /#9330 (PCI) or #9331 (SPD). Therefore, these columns are
mutually exclusive.
Note 5: Maximum is 175.4 GB on #2061 Processor.
Note 6: Any combination of Twinax or ASCII workstation controllers up to either maximum shown is allowed,
maximums are not additive.
Note 7: Processor Group is determined by a combination of the Processor and Interactive Feature. The following table
provides a cross reference.
Processor Interactive Feature Processor Group
#2061
#1500 P10
#1501 P20
#1502 P20
#2062
#1500 P10
#1501 P20
#1502 P20
#1503 P20
#2063
#1500 P20
#1502 P30
#1503 P30
#1504 P30
#2064 #1500 P20
#1502 P30
#1503 P30
#1504 P30
#1505 P30
Note 8: The total number of internal tapes and CD-ROM per tower cannot exceed the maximum quantity shown for
internal tapes. The system maximum for internal tapes and CD-ROMs is 18.