Summary of All Earlier AS/400 Models 743
Summary of All Earlier AS/400 Models
Note 1: CPW is the Commercial Processing Workload that is now being used to measure the performance of all
AS/400 processors. The CPW value is measured on maximum configurations. The type and number of disk
devices, the number of workstation controllers, the amount of memory, the system model, other factors, and
the application being run determine the performance that is achievable. All AS/400 processors announced
from September 1996 onward have only CPW performance measurements.
Note 2: This total includes the MFIOP. The combination of internal and external IOPs cannot exceed this number.
Note 3: The maximum combination of 2440, 7208 or 9348 and Tape Libraries may not exceed four.
Note 4: Processor Group is determined by a combination of the Processor and Interactive Feature. The following
table provides a cross reference.
Processor Interactive Feature Processor Group
#2069
#1514 P40
#1510 P50
#1511 P50
#1512 P50
#2070
#1514 P40
#1510 P50
#1511 P50
#1512 P50
#1513 P50
Note 5: The system maximum for internal tapes and CD-ROMs is 18.
To Next Page
Loading...
Need help?
General