IBM Flex System x440 Compute Node - Page 112

Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0108
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000006d-00000000 Management Controller [arg1]: Configuration saved to a file by user [arg2].
Explanation: A user saves a Management Controller configuration to a file.
May also be shown as 4000006d00000000 or 0x4000006d00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0109
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000006e-00000000 Alert Configuration Global Event Notification set by user [arg1]: RetryLimit=[arg2],
RetryInterval=[arg3], EntryInterval=[arg4].
Explanation: A user changes the Global Event Notification settings.
May also be shown as 4000006e00000000 or 0x4000006e00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0110
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000006f-00000000 Alert Recipient Number [arg1] updated: Name=[arg2], DeliveryMethod=[arg3],
Address=[arg4], IncludeLog=[arg5], Enabled=[arg6], EnabledAlerts=[arg7], AllowedFilters=[arg8].
Explanation: The specified user has changed or reset the remote alert recipient configuration.
May also be shown as 4000006f00000000 or 0x4000006f00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0111
SNMP Trap ID:
Automatically notify Support: No
4000006d-00000000 • 4000006f-00000000
100
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide