80010b01-3702ffff Numeric sensor Inlet 2 Temp going high (upper non-recoverable) has asserted.
Explanation: The inlet temperature has risen above the specified threshold. The system has initiated a hard
shutdown.
May also be shown as 80010b013702ffff or 0x80010b013702ffff
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0498
SNMP Trap ID: 0
Automatically notify Support: No
User response: Complete the following steps:
1. Check the CMM or FSM event log for any fan or cooling related issues.
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and
correctly installed.
3. Make sure that the room temperature is within operating specifications.
80030006-2101ffff Sensor Sig Verify Fail has deasserted.
Explanation: The secure UEFI update has been completed.
May also be shown as 800300062101ffff or 0x800300062101ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0509
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
8003010e-2581ffff Sensor Memory Resized has asserted.
Explanation: This message is for the use case when an implementation has detected a sensor has asserted.
May also be shown as 8003010e2581ffff or 0x8003010e2581ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0508
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
80010b01-3702ffff • 8003010e-2581ffff
110
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide
To Next Page