– I/O expansion adaptor in I/O expansion slot 1 and the fabric connector in slot 1 utilize the same connector and
only one of the two can be installed at a time.
– I/O expansion adaptor in I/O expansion slot 3 and the fabric connector in slot 2 utilize the same connector and
only one of the two can be installed at a time.
80080128-2101ffff Device [LogicalDeviceElementName] has been added.
Explanation: The specified device has been installed in the compute node.
May also be shown as 800801282101ffff or 0x800801282101ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0536
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
8009000c-0701ffff Device Performance Mode has been disabled.
Explanation: The user has switched from Performance mode to Acoustic mode.
May also be shown as 8009000c0701ffff or 0x8009000c0701ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0539
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
8009010c-0701ffff Device Performance Mode has been enabled.
Explanation: The user has switched from Acoustic mode to Performance mode.
May also be shown as 8009010c0701ffff or 0x8009010c0701ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0538
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
80090112-2101ffff Device [LogicalDeviceElementName] has been enabled.
Explanation: An IPMI or SNMP Account has been enabled.
May also be shown as 800901122101ffff or 0x800901122101ffff
Severity: Info
80080128-2101ffff • 80090112-2101ffff
130
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide
To Next Page