EasyManua.ls Logo

IBM Flex System x440 Compute Node - Page 150

IBM Flex System x440 Compute Node
584 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
806f000f-22010bff Firmware BIOS (ROM) corruption was detected on system [ComputerSystemElementName]
during POST.
Explanation: Firmware BIOS (ROM) corruption was detected on the system during POST. ABR Status. Firmware
Error.
May also be shown as 806f000f22010bff or 0x806f000f22010bff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0850
SNMP Trap ID: 50
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
806f000f-22010cff CPU voltage mismatch detected on [ProcessorElementName].
Explanation: This message is for the use case when an implementation has detected a CPU voltage mismatch with
the socket voltage. ABR Status. Firmware Error. Sys Boot Status.
May also be shown as 806f000f22010cff or 0x806f000f22010cff
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0050
SNMP Trap ID: 40
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
806f000f-2201ffff The System [ComputerSystemElementName] encountered a POST Error.
Explanation: This message is for the use case when an implementation has detected a Post Error. ABR Status.
Firmware Error.
May also be shown as 806f000f2201ffff or 0x806f000f2201ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0184
SNMP Trap ID: 50
Automatically notify Support: No
806f000f-22010bff 806f000f-2201ffff
138
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide

Table of Contents