EasyManua.ls Logo

IBM Flex System x440 Compute Node - Page 258

IBM Flex System x440 Compute Node
584 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Automatically notify Support: Yes
User response:
1. Check http://www.ibm.com/supportportal/ for RETAIN tips or firmware updates that might correct the error.
2. Make sure that all I/O expansion adapters have correct and matching levels of device drivers and firmware.
3. Check the system-event log for additional information about failing components.
4. If there are no entries related to the error in the system-event log, contact IBM Support and send DSA data to
IBM.
806f0813-2584ffff A Uncorrectable Bus Error has occurred on system [ComputerSystemElementName].
Explanation: A catastrophic system error has occurred. The system firmware will attempt to analyze the failure to
determine whether the failure was due to a hardware component or a software component.
May also be shown as 806f08132584ffff or 0x806f08132584ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0240
SNMP Trap ID: 50
Automatically notify Support: Yes
User response:
1. Check http://www.ibm.com/supportportal/ for RETAIN tips or firmware updates that might correct the error.
2. Make sure that all I/O expansion adapters have correct and matching levels of device drivers and firmware.
3. Check the system-event log for additional information about failing components.
4. If there are no entries related to the error in the system-event log, contact IBM Support and send DSA data to
IBM.
806f0823-2101ffff Watchdog Timer interrupt occurred for [WatchdogElementName].
Explanation: The IPMI watchdog timer has expired. A watchdog interrupt has occurred.
May also be shown as 806f08232101ffff or 0x806f08232101ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0376
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
806f090c-2001ffff [PhysicalMemoryElementName] on Subsystem [MemoryElementName] Throttled.
Explanation: This message is for the use case when an implementation has detected Memory has been Throttled.
May also be shown as 806f090c2001ffff or 0x806f090c2001ffff
Severity: Warning
Alert Category: System - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0142
806f0813-2584ffff 806f090c-2001ffff
246
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide

Table of Contents