SNMP Trap ID: 12
Automatically notify Support: No
User response: Information only; no action is required.
81070101-2c04ffff Sensor Mezz Exp 4 temp has deasserted the transition from normal to non-critical state.
Explanation: The previously high I/O Exansion card temperature has returned to below its specified threshold.
May also be shown as 810701012c04ffff or 0x810701012c04ffff
Severity: Info
Alert Category: Warning - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0521
SNMP Trap ID: 12
Automatically notify Support: No
User response: Information only; no action is required.
81070101-2d01ffff Sensor PCH Overtemp has deasserted the transition from normal to non-critical state.
Explanation: IMM has detected that the PCH temperature has returned to a normal range.
May also be shown as 810701012d01ffff or 0x810701012d01ffff
Severity: Info
Alert Category: Warning - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0521
SNMP Trap ID: 12
Automatically notify Support: No
User response: Information only; no action is required.
81070101-3701ffff Sensor Inlet 1 Overtemp has deasserted the transition from normal to non-critical state.
Explanation: This message is for the use case when an implementation has detected that the Inlet 1 temperature has
deasserted a transition to non-critical from normal.
May also be shown as 810701013701ffff or 0x810701013701ffff
Severity: Info
Alert Category: Warning - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0521
SNMP Trap ID: 12
Automatically notify Support: No
User response: Information only; no action is required.
81070101-3702ffff Sensor Inlet 2 Overtemp has deasserted the transition from normal to non-critical state.
Explanation: This message is for the use case when an implementation has detected the Inlet 2 temperature has
deasserted a transition to non-critical from normal.
May also be shown as 810701013702ffff or 0x810701013702ffff
81070101-2c04ffff • 81070101-3702ffff
294
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide
To Next Page