816f0028-2101ffff Sensor TPM Cmd Failures has returned to normal on management system
[ComputerSystemElementName].
Explanation: TPM was initialized and started successfully.
May also be shown as 816f00282101ffff or 0x816f00282101ffff
Severity: Info
Alert Category: Warning - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0399
SNMP Trap ID: 60
Automatically notify Support: No
User response: Information Only; no action is required.
816f0107-0301ffff An Over-Temperature Condition has been removed on [ProcessorElementName].
Explanation: The microprocessor 1 temperature has returned to below the critical level.
May also be shown as 816f01070301ffff or 0x816f01070301ffff
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0037
SNMP Trap ID: 0
Automatically notify Support: No
User response: Information only; no action is required.
816f0107-0302ffff An Over-Temperature Condition has been removed on [ProcessorElementName].
Explanation: The microprocessor 2 temperature has returned to below the critical level.
May also be shown as 816f01070302ffff or 0x816f01070302ffff
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0037
SNMP Trap ID: 0
Automatically notify Support: No
User response: Information only; no action is required.
816f0107-0303ffff An Over-Temperature Condition has been removed on [ProcessorElementName].
Explanation: The microprocessor 3 temperature has returned to below the critical level.
May also be shown as 816f01070303ffff or 0x816f01070303ffff
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0037
816f0028-2101ffff • 816f0107-0303ffff
312
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide
To Next Page