Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
816f040c-201bffff [PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName].
Explanation: This message is for the use case when an implementation has detected that Memory has been Enabled.
May also be shown as 816f040c201bffff or 0x816f040c201bffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0130
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
816f040c-201cffff [PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName].
Explanation: This message is for the use case when an implementation has detected that Memory has been Enabled.
May also be shown as 816f040c201cffff or 0x816f040c201cffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0130
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
816f040c-201dffff [PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName].
Explanation: This message is for the use case when an implementation has detected that Memory has been Enabled.
May also be shown as 816f040c201dffff or 0x816f040c201dffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0130
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
816f040c-201bffff • 816f040c-201dffff
Chapter 6. Troubleshooting 359
To Next Page
Loading...
