IBM Flex System x440 Compute Node - Page 396

816f050c-2581ffff Memory Logging Limit Removed for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
Explanation: This message is for the use case when an implementation has detected that the Memory Logging Limit
has been Removed. All DIMMs. One of the DIMMs.
May also be shown as 816f050c2581ffff or 0x816f050c2581ffff
Severity: Info
Alert Category: Warning - Memory
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0145
SNMP Trap ID: 43
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
816f050d-0400ffff Critical Array [ComputerSystemElementName] has deasserted.
Explanation: The RAID array is no longer in a critical condition.
May also be shown as 816f050d0400ffff or 0x816f050d0400ffff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0175
SNMP Trap ID: 5
Automatically notify Support: No
User response: Information only; no action is required.
816f050d-0401ffff Critical Array [ComputerSystemElementName] has deasserted.
Explanation: The RAID array is no longer in a critical condition.
May also be shown as 816f050d0401ffff or 0x816f050d0401ffff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0175
SNMP Trap ID: 5
Automatically notify Support: No
User response: Information only; no action is required.
816f050d-0402ffff Critical Array [ComputerSystemElementName] has deasserted.
Explanation: The RAID array is no longer in a critical condition.
May also be shown as 816f050d0402ffff or 0x816f050d0402ffff
Severity: Info
Alert Category: Critical - Hard Disk drive
816f050c-2581ffff • 816f050d-0402ffff
384
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide