816f060d-0406ffff Array in system [ComputerSystemElementName] has been restored.
Explanation: The failed RAID array has been restored.
May also be shown as 816f060d0406ffff or 0x816f060d0406ffff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0177
SNMP Trap ID: 5
Automatically notify Support: No
User response: Information only; no action is required.
816f060d-0407ffff Array in system [ComputerSystemElementName] has been restored.
Explanation: The failed RAID array has been restored.
May also be shown as 816f060d0407ffff or 0x816f060d0407ffff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0177
SNMP Trap ID: 5
Automatically notify Support: No
User response: Information only; no action is required.
816f070c-2001ffff Configuration error for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName]has deasserted.
Explanation: This message is for the use case when an implementation has detected a Memory DIMM configuration
error has deasserted.
May also be shown as 816f070c2001ffff or 0x816f070c2001ffff
Severity: Info
Alert Category: Critical - Memory
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0127
SNMP Trap ID: 41
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
816f070c-2002ffff Configuration error for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName]has deasserted.
Explanation: This message is for the use case when an implementation has detected a Memory DIMM configuration
error has deasserted.
May also be shown as 816f070c2002ffff or 0x816f070c2002ffff
Severity: Info
816f060d-0406ffff • 816f070c-2002ffff
390
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide