IBM Flex System x440 Compute Node - Page 446

Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: Information only; no action is required.
816f0a0c-201dffff An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName].
Explanation: Memory DIMM is no longer in an over-temperature condition.
May also be shown as 816f0a0c201dffff or 0x816f0a0c201dffff
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: Information only; no action is required.
816f0a0c-201effff An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName].
Explanation: Memory DIMM is no longer in an over-temperature condition.
May also be shown as 816f0a0c201effff or 0x816f0a0c201effff
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: Information only; no action is required.
816f0a0c-201fffff An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName].
Explanation: Memory DIMM is no longer in an over-temperature condition.
May also be shown as 816f0a0c201fffff or 0x816f0a0c201fffff
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: Information only; no action is required.
816f0a0c-201dffff • 816f0a0c-201fffff
434
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide