Table 2. IMM2 actions (continued)
Tab Selection Description
IMM Management Network The Network Protocol Properties page provides access to networking
properties, status, and settings for your IMM2:
v The Ethernet tab manages how the IMM2 communicates using
Ethernet.
v The SNMP tab configures the SNMPv1 and SNMPv3 agents.
v The DNS tab configures the DNS servers that the IMM2 interacts with.
v The DDNS tab enables or disables and configures Dynamic DNS for
the IMM2.
v The SMTP tab configures SMTP server information used for alerts sent
via email.
v The LDAP tab configures user authentication for use with one or more
LDAP servers.
v The Telnet tab manages Telnet access to the IMM2.
v The USB tab controls the USB interface used for in-band
communication between the server and the IMM2. These settings do
not affect the USB remote control functions (keyboard, mouse, and
mass storage).
v The Port Assignments tab allows you to change the port numbers used
by some services on the IMM2.
Security The IMM Security page provides access to security properties, status, and
settings for your IMM2:
v The HTTPS Server tab allows you to enable or disable the HTTPS
server and manage its certificates.
v The CIM Over HTTPS tab allows you to enable or disable CIM over
HTTPS and manage its certificates.
v The LDAP Client tab allows you to enable or disable LDAP security
and manage its certificates.
v The SSH Server tab allows you to enable or disable the SSH server and
manage its certificates.
Restart IMM The Restart IMM page allows you to reset the IMM.
IMM Configuration The IMM Configuration page displays a summary of the current IMM2
configuration settings. It also provides the following functions:
v Backup the current IMM2 configuration
v Restore a saved IMM2 configuration
v Display backup and restoration status
v Reset the configuration of the IMM2 to the factory defaults.
v Access the IMM2 initial setup wizard
Note: Backups that you make from the IMM user interface will not
contain any local user accounts that were created from the IMM user
interface.
Reset IMM to
factory defaults...
The Reset IMM to factory defaults... page allows you to reset the
configuration of the IMM2 to the factory defaults.
Attention: When you click Reset IMM to factory defaults..., all of the
modifications that you made to the IMM2 are lost.
Activation Key
Management
The Activation Key Management page allows you to manage activation
keys for optional IMM2 or compute node Features on Demand (FoD)
features.
Chapter 4. Accessing the IMM2 47
To Next Page
Loading...
Need help?
General