IBM Flex System x440 Compute Node - Page 82

40000004-00000000 Ethernet Duplex setting modified from [arg1] to [arg2] by user [arg3].
Explanation: The specified user has changed the Ethernet duplex setting of the Integrated Management Module
external network interface to the specified value.
May also be shown as 4000000400000000 or 0x4000000400000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0004
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000005-00000000 Ethernet MTU setting modified from [arg1] to [arg2] by user [arg3].
Explanation: The specified user has changed the Ethernet maximum transmission unit (MTU) setting of the
Integrated Management Module external network interface to the specified value.
May also be shown as 4000000500000000 or 0x4000000500000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0005
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000006-00000000 Ethernet locally administered MAC address modified from [arg1] to [arg2] by user [arg3].
Explanation: The specified user has changed the Ethernet locally administered MAC address of the Integrated
Management Module external network interface to the specified value
May also be shown as 4000000600000000 or 0x4000000600000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0006
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000007-00000000 Ethernet interface [arg1] by user [arg2].
Explanation: The specified user has enabled or disabled the Ethernet interface.
May also be shown as 4000000700000000 or 0x4000000700000000
Severity: Info
Alert Category: none
Serviceable: No
40000004-00000000 • 40000007-00000000
70
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide